14-19 Chevy Corvette C7 Z06/ZR1 Touring Edition Axle-Back Exhaust w/Chrome Tips
Touring Edition Exhaust:
A straight-through design, the AWE Touring Edition Axleback is a 3” T304L stainless steel configuration featuring AWE’s proprietary, drone-canceling solution, 180 Technology®.
With aggression on-tap, the Touring Edition provides the ultimate experience for drivers wanting the ability to unleash the fury of the 6.2L while providing drone-free in-cabin acoustics at cruising speeds. Responsive to throttle input, the 180 Technology®-equipped Touring Edition is capable of remaining tame until provoked by the driver.
The Touring Edition Axleback comes complete with over-axle tubes, rear 180 Technology® resonators, quad 4.5” double-walled tips in chrome silver or diamond black, and all necessary hardware for installation.
AWE's Pantented 180 Technology®:
As exhaust gases exit the Corvette’s 6.2L engine and flow into an AWE 180 Technology® equipped resonator, they pass through strategically located ports, and into reflection chambers. Sound waves, carried by these exhaust gasses, bounce off the walls of the reflection chambers. By controlling the size and location of the ports and the chambers, we also control when the sound waves exit the chambers. The specific timing of when the reflected sound waves rejoin the main exhaust flow creates a one-hundred-and-eighty-degree out-of-phase sound wave that cancels out problematic frequencies.
Made in PA, USA:
Engineered, designed, and manufactured in-house at AWE using US-sourced .065”-wall T304L stainless steel to achieve a tone deeper than everyone else.
Product Details
- Proudly engineered, designed, and manufactured in-house, in the USA
- Included AWE AFM Valve Simulators allow AFM-equipped cars to run full axleback exhausts
- Peak gains of 18 hp and 16 ft-lbs of torque, and max gains of 22 hp @ 6400 rpm and 20 ft-lbs of torque @ 4000 rpm, at the wheels (full Touring Edition Axleback Exhaust)
- Touring Edition features AWE’s proprietary straight-through drone-canceling solution, 180 Technology®
- No compromises: all muscle, zero drone (Touring Edition)
- Handcrafted from 3” U.S.-sourced CNC mandrel-bent .065” wall T304L stainless steel
- 4.5” double-walled tips in chrome silver or diamond black
- Less is more: clean, non-baffled, straight-through design maximizes performance
- Significant weight savings over stock
- Perfect Fitment -- guaranteed
- Featuring the AWE Lifetime Exhaust Warranty
IMPORTANT FITMENT NOTE FOR AFM-EQUIPPED VEHICLES:
The included AWE AFM Valve Simulators are required for vehicles equipped with AFM valves; i.e. Corvette Stingray / Z51 Auto / Z51 Manual (2014-2016) / Grand Sport Auto
Fitment
| Year | Make | Model | Sub-Model |
|---|---|---|---|
| 2017-2019 | Chevrolet | Corvette | Grand Sport |
| 2014-2019 | Chevrolet | Corvette | Stingray |
| 2015-2019 | Chevrolet | Corvette | Z06 |
| 2019 | Chevrolet | Corvette | ZR1 |
AWE's Warranty
For information on AWE's warranty terms and conditions, please click here
Purchase Disclaimer: You are hereby informed and warned to check your local, state, and federal laws before buying and installing these or any aftermarket parts to be sure whether usage is in violation. All installation-risk and use-risk is borne by the end-user and installer of these parts. Bolt Motorsports does not condone the use of emission defeat devices for any vehicles used on public streets or roadways. Bolt Motorsports will not tamper, remove, disable, or bypass emissions equipment on a motor vehicle in accordance with 40 CFR Section 86.1854.12(a)(3), Clean Air Act 40 CFR 1068.101(b). This includes software, known as tunes, that reprogram a motor vehicles electronic control module to alter engine performance and enable the removal of filters, catalysts, and other critical emissions controls. In accordance with local laws and regulations, Bolt Motorsports will not ship parts to locations where usage or installation of said part would be in violation of the aforementioned acts.