20-23 Chevrolet Corvette (C8) Touring Edition Exhaust - Quad Chrome Silver Tips
Touring Edition Exhaust:
At the intersection of sophistication and aggression lies the Touring Edition Exhaust. A dual 3” T304L stainless steel cat-back configuration, the AWE Touring Edition Exhaust is the perfect dose of steel for drivers looking for straight-pipe performance without sacrificing perfect daily drivability: a deep, sophisticated, exotic exhaust note with zero drone at highway speeds and V4 mode, all without the use of valves.
Thanks to the asymmetric design, the number of necessary bends is minimized, thus removing the unwanted restriction in flow while facilitating impressive gains across the entire powerband. Paired with robust internally-lined stainless steel flex sections upstream, engine movement is significantly isolated, enabling life-long durability for peace of mind. Going the asymmetric approach also allowed us the opportunity of creating a bespoke cross-over section with entries from both the top and the bottom. By doing this we're able to achieve a rich and aggressive exhaust note out of the LT2 whether it be at idle, rev, or WOT.
Beyond the unique crossover, the Touring Edition brings up the rear in proper fashion by featuring AWE’s patented drone-canceling solution, 180 Technology®, which targets and omits drone-prone frequencies while defeating the dreaded in-cabin tone change when switching between V4 and V8 modes.
What’s this mean for you? You’ll be tuned into a pure, full-bodied LT2 soundtrack unlike any other without sacrificing in-cabin refinement, all while saving 31 lbs over stock.
AWE's Pantented 180 Technology®:
As exhaust gases exit the LT2 engine and flow into an AWE 180 Technology® equipped resonator, they pass through strategically located ports, and into reflection chambers. Sound waves, carried by these exhaust gasses, bounce off the walls of the reflection chambers. By controlling the size and location of the ports and the chambers, we also control when the sound waves exit the chambers. The specific timing of when the reflected sound waves rejoin the main exhaust flow creates a one-hundred-and-eighty-degree out-of-phase sound wave that cancels out problematic frequencies.
Made in PA, USA:
Engineered, designed, and manufactured in-house at AWE using US-sourced .065”-wall T304L stainless steel to achieve a tone deeper than everyone else.
Product Details

- Bespoke, valveless, asymmetric exhaust design unlock signature tone and performance
- Max gains of 19 hp and 15 ft-lbs of torque at the wheels
- Patented drone-canceling 180 Technology® (Touring Edition)
- Engineered to defeat the dreaded in-cabin tone change between V4 and V8 modes without the use of valves (Touring Edition)
- Handcrafted from 3” CNC mandrel-bent, U.S.-made .065” wall T304L stainless steel
- Robust 8” flex sections isolate engine movement and increase durability
- Weight savings of 31 lbs (Touring Edition) compared to stock
- Tip options include quad 4.5” double-walled slash cut tips in chrome silver or diamond black
- Includes AWE AFM valve simulators, NPP valve simulators, and bespoke aluminum heat shield
- Rigorously tested in a drag environment, road-course environment, and via long-term street testing
- No effect on factory emissions equipment
- Direct bolt-on, no cutting
- AWE Perfect Fitment Guarantee
- AWE Lifetime Warranty
- Proudly engineered, designed, and manufactured in-house at AWE
Fitment
Year | Make | Model | Sub-Model |
---|---|---|---|
2020-2023 | Chevrolet | Corvette | Stingray |
AWE's Warranty
For information on AWE's warranty terms and conditions, please click here
Purchase Disclaimer: You are hereby informed and warned to check your local, state, and federal laws before buying and installing these or any aftermarket parts to be sure whether usage is in violation. All installation-risk and use-risk is borne by the end-user and installer of these parts. Bolt Motorsports does not condone the use of emission defeat devices for any vehicles used on public streets or roadways. Bolt Motorsports will not tamper, remove, disable, or bypass emissions equipment on a motor vehicle in accordance with 40 CFR Section 86.1854.12(a)(3), Clean Air Act 40 CFR 1068.101(b). This includes software, known as tunes, that reprogram a motor vehicles electronic control module to alter engine performance and enable the removal of filters, catalysts, and other critical emissions controls. In accordance with local laws and regulations, Bolt Motorsports will not ship parts to locations where usage or installation of said part would be in violation of the aforementioned acts.