Skip to content
Skip to product information
Description

Sway Bar Kit With Bushings

The two primary functions of sway bars are to control body roll and to determine the understeer or oversteer behavior of a vehicle. Stock sway bars have low torsional spring rates because they are manufactured from small diameter bar stock or tubing. BMR Suspensions SB013 rear sway bar was designed by factoring in the vehicle weight, application, motion ratio, coil spring rate, and adjustability requirements. Manufactured from heavy-wall 22mm DOM tubing, the SB013 is cold formed to better resist torsional fatigue and retain its "memory" far longer than the hot-formed bars used by many competitors. The sway bar is CNC-formed for exact manufacturing tolerances and repeatable high quality. Thrust washers are welded to the bar to locate the sway bar bushing mounts. This is critical as it properly locates the sway bar and prevents lateral movement during hard cornering maneuvers. The SB013 attaches to your G8 with 88-durometer polyurethane bushings, reducing the deflection from the stock rubber bushings. These bushings are molded from 88-durometer, low-deflection, polyurethane, and are internally fluted to keeps grease in the bushing. The fabricated laser cut, TIG-welded steel sway bar end links are reinforced to minimize deflection. The sway bar is 3-way adjustable to tune the amount of torsional spring rate and to determine the handling characteristics (understeer/oversteer) of the vehicle.

BMR Suspension designed the SB013 sway bar for street performance, drag race, autocross, and road race applications. The large adjustable sway bar has three positions, giving you the versatility to drive to and from the track and still out handle the competition with the same sway bar. The SB013 gives you a 91%-286% increase in rate over the stock bar (depending on year and model). These rate increases and adjustability allow you to fine-tune the handling characteristics of the suspension so you can drive harder through corners with minimal body roll. The hollow design allows for loads of strength without adding a lot of weight. This allows for more sway bar control, which equals better handling. When performance is a must, rely on BMR Suspension!

BMR Suspensions SB013 sway bars are available in black hammertone and red powdercoat for long-lasting good looks. Installation time is about 1-2 hours. Proudly made in the U.S.A.!

Hole 1 91% stiffer than OE bar
Hole 2 164% stiffer than OE bar
Hole 3 286% stiffer than OE bar


Features

  • Designed for street performance, drag race, autocross, and road race applications
  • Dramatically reduces body roll
  • 91%-286% increase in sway bar rate over stock sway bar (depending on year and model)
  • Cold formed to better resist torsional fatigue
  • Manufactured from 22mm heavy-wall DOM tubing for increased strength
  • Three-way adjustable for street and track use
  • Adjustability allows for fine-tuning of suspension
  • 88-durometer, greasable polyurethane bushings
  • Zinc-plated inner sleeves
  • Durable powdercoat finish
  • 1-2-hour installation time
  • Proudly designed in the U.S.A.
  • Proudly made in the U.S.A.


Click here  for installation instructions.

Fitment

Year Make Model
2008-2009 Pontiac G8

BMR Suspension's Warranty

For information on BMR Suspension's warranty terms and conditions, please click here

BMR 08-09 Pontiac G8 Rear Hollow 22mm Adj. Sway Bar Kit w/ Bushings - Red

Regular price $129.99
Sold out

Shipping calculated at checkout

BMRSB013R

Sway Bar Kit With Bushings

The two primary functions of sway bars are to control body roll and to determine the understeer or oversteer behavior of a vehicle. Stock sway bars have low torsional spring rates because they are manufactured from small diameter bar stock or tubing. BMR Suspensions SB013 rear sway bar was designed by factoring in the vehicle weight, application, motion ratio, coil spring rate, and adjustability requirements. Manufactured from heavy-wall 22mm DOM tubing, the SB013 is cold formed to better resist torsional fatigue and retain its "memory" far longer than the hot-formed bars used by many competitors. The sway bar is CNC-formed for exact manufacturing tolerances and repeatable high quality. Thrust washers are welded to the bar to locate the sway bar bushing mounts. This is critical as it properly locates the sway bar and prevents lateral movement during hard cornering maneuvers. The SB013 attaches to your G8 with 88-durometer polyurethane bushings, reducing the deflection from the stock rubber bushings. These bushings are molded from 88-durometer, low-deflection, polyurethane, and are internally fluted to keeps grease in the bushing. The fabricated laser cut, TIG-welded steel sway bar end links are reinforced to minimize deflection. The sway bar is 3-way adjustable to tune the amount of torsional spring rate and to determine the handling characteristics (understeer/oversteer) of the vehicle.

BMR Suspension designed the SB013 sway bar for street performance, drag race, autocross, and road race applications. The large adjustable sway bar has three positions, giving you the versatility to drive to and from the track and still out handle the competition with the same sway bar. The SB013 gives you a 91%-286% increase in rate over the stock bar (depending on year and model). These rate increases and adjustability allow you to fine-tune the handling characteristics of the suspension so you can drive harder through corners with minimal body roll. The hollow design allows for loads of strength without adding a lot of weight. This allows for more sway bar control, which equals better handling. When performance is a must, rely on BMR Suspension!

BMR Suspensions SB013 sway bars are available in black hammertone and red powdercoat for long-lasting good looks. Installation time is about 1-2 hours. Proudly made in the U.S.A.!

Hole 1 91% stiffer than OE bar
Hole 2 164% stiffer than OE bar
Hole 3 286% stiffer than OE bar


Features

  • Designed for street performance, drag race, autocross, and road race applications
  • Dramatically reduces body roll
  • 91%-286% increase in sway bar rate over stock sway bar (depending on year and model)
  • Cold formed to better resist torsional fatigue
  • Manufactured from 22mm heavy-wall DOM tubing for increased strength
  • Three-way adjustable for street and track use
  • Adjustability allows for fine-tuning of suspension
  • 88-durometer, greasable polyurethane bushings
  • Zinc-plated inner sleeves
  • Durable powdercoat finish
  • 1-2-hour installation time
  • Proudly designed in the U.S.A.
  • Proudly made in the U.S.A.


Click here  for installation instructions.

Fitment

Year Make Model
2008-2009 Pontiac G8

BMR Suspension's Warranty

For information on BMR Suspension's warranty terms and conditions, please click here

BMR 08-09 Pontiac G8 Rear Hollow 22mm Adj. Sway Bar Kit w/ Bushings - Red - BOLT Motorsports
BMR 08-09 Pontiac G8 Rear Hollow 22mm Adj. Sway Bar Kit w/ Bushings - Red

NOTE: We are experiencing delays in processing due to COVID-19. We are working around the clock to get your orders processed. In most cases, we are able to meet our standard processing times, however processing time may extend to 10 business days during this unprecedented time.

You will receive your order in the time allotted depending on your shipping choice, or sooner. Please note, the shipping time does not include processing time, which may take up to 3 business days.

After your payment is authorized and verified, it can still take up to 2 business days to process your order through our warehouses.

Business days do not include weekends or Holidays. Orders placed on Friday's after 12:00PM CST will begin processing the following Monday.

We reserve the right to ship with a different method than selected if it gets the item to you faster or the shipping service is unavailable for your item. If you selected ground service, regardless of the carrier, we may use a different carrier than what you selected. Your tracking number will reflect the service we have shipped with.

Faster than standard shipping may not be available for your item. In these cases, a refund for the difference in standard and accelerated shipping will be issued back to your payment method and you will be notified.

Shipping time is calculated in the shopping cart. Remember, this does not include processing time and may not be available for your item. If you have firm deadlines and require items urgently, please contact our live support representatives or email support@BoltMotorsports.com.

We use all major Carriers, including UPS, USPS and FedEx.

Address Changes are only allowed on a case-by-case basis and within 14 days of the original order placement. Please reach out to our support team to see if your order is eligible for address change.

ALL Branded Merchandise such as apparel and accessories ship via USPS for domestic orders (First class or Priority based on weight).

BRANDS: PROCHARGER AND HELLION TURBOS ARE EXCLUDED FROM THE ABOVE POLICY AND WILL FOLLOW THE BELOW.

Custom Order Disclaimer

ProCharger and Hellion Turbo products are deemed custom orders. Handling time may exceed 3 days and are subject to vendor's lead times. Once paid, your order is forwarded to the vendor within 2 hours, after which it cannot be cancelled and will be subject to return conditions. By purchasing, you agree to these terms. Please ensure you understand our return policy before purchase.

At Bolt Motorsports, we accept the following Payment Methods:

  • Visa
  • Mastercard
  • Discover
  • American Express
  • PayPal
  • Diners Club
  • Shop Pay
  • Apple Pay
  • Google Pay

Sales Tax

In compliance with state regulations, sales tax is required for orders shipping to specific states within the US. We reserve the right to charge sales tax in all 50 states, if required by state nexus laws.

RETURNS FOR BOLT MOTORSPORTS BRANDED MERCHANDISE (E.G., HATS, T-SHIRTS, STICKERS, ETC.)

PLEASE NOTE THAT ALL SALES ON BOLT MOTORSPORTS MANUFACTURED AND BRANDED ITEMS ARE FINAL.

Modifications to orders

Modifications to orders cannot be made once they have been placed.

Returns for Parts (e.g., Performance parts, OEM replacement parts, etc.)

Cancellations of existing orders are managed through a cancellation request and are not treated as returns. Please send an email to the below address for cancellation. Please include Order number, Part Number, Name, Email address, phone number and shipping address.

Support@BoltMotorsports.com

Restocking Fee

A 20% restocking fee will apply to all non-defective returns. Choosing store credit or an exchange will waive the restocking fee. Shipping charges are non-refundable. For orders with Free Shipping, the original shipping charges will also apply.

Free Shipping Disclaimer

Items eligible for free shipping promotions: When returned for convenience, the original shipping cost will be deducted from the refund, in addition to a 20% restocking fee. Shipping fees vary; for large items, such as coilovers, shipping fees can be around $125.

Note: Returns for store credit are still subject to the original shipping charges being deducted from the refund.

Order Changes

You may request an order change, provided it has not already been processed. We process orders rapidly, so it is likely that we will have processed your order immediately for shipment. As such, please exercise caution when placing orders to ensure you are selecting the correct items.

Your order may have not been cancelled for several reasons including:

  • The warehouse has picked the items for this order and are being packed.
  • The items are packaged and there is a label with tracking number on the box.
  • The order is closed, and the package has already shipped.

Refusal/Return to Sender Fees

IF A SHIPMENT IS REFUSED BY A RECIPIENT, OR RETURNED TO SENDER (RTS) DUE TO AN ADDRESS ISSUE, THE ASSOCIATED FEES WILL BE DEDUCTED FROM THE VALUE OF THE RETURN CREDIT ON TOP OF RESTOCKING FEES. THE COST OF THE REFUSAL/RTS FEES ARE DETERMINED BY BOLT MOTORSPORTS.

MISTAKES MADE ON ORDERS MAY RESULT IN CANCELLATION AND RETURN FEES, PARTICULARLY IF THE ORDER SHIPS RIGHT AWAY. TO SUBMIT A EMAIL TO:

SUPPORT@BOLTMOTORSPORTS.COM

Backorder/Preorder Items

Backorder and preorder items may be subject to cancellation fees. For more information, please contact us.

Typographical Errors

In the event a product is listed with an incorrect price or inaccurate information due to a typographical error or an error in pricing or product information received from our suppliers, Bolt Motorsports reserves the right to refuse or cancel any orders placed for the affected product. Bolt Motorsports reserves the right to refuse or cancel any such orders, whether the order has been confirmed and your credit card charged. If your credit card has already been charged for the purchase and your order is canceled, Bolt Motorsports shall immediately issue a credit to your credit card account in the amount of the charge. Please note that the time for actual use of money returned is based on your financial institution. Typically, this is 5-10 business days.

Order Acceptance Policy

Your receipt of an electronic or other form of order confirmation does not signify our acceptance of your order, nor does it constitute confirmation of our offer to sell. Bolt Motorsports reserves the right at any time after receipt of your order to accept or decline your order for any reason. Bolt Motorsports also reserves the right, to supply less than the quantity you ordered of any item. Bolt Motorsports will make every reasonable attempt to reach our customer to inform of any order deviation, prior to closing the order complete on our end. All orders over $2000.00 (U.S.) must obtain pre-approval with an acceptable method of payment, as established by our credit and fraud prevention department. We may require additional verifications or information before accepting any order.

Customer Information

Any customer information, including email addresses, received by Bolt Motorsports will be used solely in connection with your order and will not be sold or transferred to any third party. Periodically, Bolt Motorsports may wish to communicate with customers via email or electronic newsletter. If you do not wish to receive email communications from Bolt Motorsports, you may send an email to support@boltmotorsports.com with "remove from email list" in the subject line, and you will not receive any further email communications from us.

Security

Whether you are placing an order by phone or online, security is our top priority. All online transactions are sent through our secure server and encrypted with 128-bit technology. Once the information is received through the internet or by phone, our trusted authorized employees will process your payment and ensure that your information is handled with the highest level of security.

Drawer Title
Similar Products